Hemodiafiltration: a synergy yet to be convincing / Hemodiafiltração: uma sinergia ainda não convincente

ABSTRACT The desperate attempt to improve mortality, morbidity, quality of life and patient-reported outcomes in patients on hemodialysis has led to multiple attempts to improve the different modes, frequencies, and durations of dialysis sessions in the last few decades. Nothing has been more appealing than the combination of diffusion and convection in the form of hemodiafiltration. Despite the concrete evidence of better clearance of middle weight molecules and better hemodynamic stability, tangible evidence to support the universal adoption is still at a distance. Survival benefits seen in selected groups who are likely to tolerate hemodiafiltration with better vascular access and with lower comorbid burden, need to be extended to real life dialysis patients who are older than the population studied and have significantly higher comorbid burden. Technical demands of initiation hemodiafiltration, the associated costs, and the incremental benefits targeted, along with patient-reported outcomes, need to be explored further before recommending hemodiafiltration as the mode of choice.

RESUMO A tentativa desesperada de melhorar a mortalidade, morbidade, qualidade de vida e desfechos relatados pelos pacientes em indivíduos em hemodiálise levou a diversas tentativas de aprimorar os diferentes modos, frequências e durações das sessões de diálise nas últimas décadas. Nada foi mais atrativo do que a combinação de difusão e convecção na forma de hemodiafiltração. Apesar das evidências concretas de melhor depuração de moléculas de peso médio e melhor estabilidade hemodinâmica, evidências tangíveis para apoiar a adoção universal ainda estão distantes. Os benefícios de sobrevida observados em grupos selecionados que provavelmente toleram a hemodiafiltração com melhor acesso vascular e com menor carga de comorbidades precisam ser estendidos aos pacientes reais em diálise, que são mais velhos do que a população estudada e apresentam uma carga de comorbidades significativamente maior. As exigências técnicas do início da hemodiafiltração, os custos associados e os benefícios incrementais almejados, juntamente com os desfechos relatados pelos pacientes, precisam ser melhor explorados antes de se recomendar a hemodiafiltração como o modo de escolha.

Boosting sodium-ion battery performance with binary metal-doped Na3V2(PO4)2F3 cathodes.

Na3V2(PO4)2F3 (NVPF), recognized for its Na superionic conductor architecture, emerges as a promising candidate among polyanion-type cathodes for sodium ion batteries (SIBs). However, its adoption in practical applications faces obstacles due to its inherently low electronic conductivity. To address this challenge, we employ a binary co-doped strategy to design Na3.3K0.2V1.5Mg0.5(PO4)2F3 cathode with nitrogen-doped carbon (NC) coating layer. This configuration enhances electronic conductivity and reduces diffusion barriers for sodium ion (Na+). The strategy of incorporating nitrogen-doped carbon coating not only facilitates the formation of a porous structure but also introduces additional defects and active sites. Such modifications accelerate the reaction kinetics and augment electrolyte interaction through an expanded specific surface area, thus streamlining the electrochemical process. Concurrently, strategic heteroatom substitution leads to a more efficient engagement of Na+ in the electrochemical activities, thereby bolstering the cathode's structural integrity. The vanadium fluorophosphate Na3.3K0.2V1.5Mg0.5(PO4)2F3@NC exhibits an electrochemical performance, including a high discharge specific capacity of 124.3 mA h g-1 at 0.1C, a long lifespan of 1000 cycles with a capacity retention of 93.1 % at 10C, and a rate property of 73.2 mA h g-1 at 20C. This research provides a method for preparing binary doped NVPF for energy storage electrochemistry.

Thermostability optimization of the aspartate/alanine exchange transporter from Tetragenococcus halophilus.

Aspartate/alanine exchange transporter (AspT) is a secondary transporter isolated from the lactic acid bacterium Tetragenococcus halophilus D10 strain. This transporter cooperates with aspartate decarboxylase to produce proton-motive force through decarboxylative phosphorylation. A method that successfully analyzes the AspT mechanism could serve as a prototype for elucidating the substrate transport mechanism of other exchange transporters; therefore, the purpose of this study was to search for conditions that improve the thermal stability of AspT for 3D structure analysis. We used the fluorescence size-exclusion chromatography-based thermostability assay to evaluate conditions that contribute to AspT stability. We found that the AspT thermostability was enhanced at pH 5.0 to 6.0 and in the presence of Na+ and Li+. Pyridoxal phosphate, a coenzyme of aspartate decarboxylase, also had a thermostabilizing effect on AspT. Under the conditions obtained from these results, it was possible to increase the temperature at which 50% of dimer AspT remained by 14°C. We expect these conditions to provide useful information for future structural analysis of AspT.

Compare deep learning model and conventional logistic regression model for the identification of unstable saccular intracranial aneurysms in computed tomography angiography.

Background: It is crucial to distinguish unstable from stable intracranial aneurysms (IAs) as early as possible to derive optimal clinical decision-making for further treatment or follow-up. The aim of this study was to investigate the value of a deep learning model (DLM) in identifying unstable IAs from computed tomography angiography (CTA) images and to compare its discriminatory ability with that of a conventional logistic regression model (LRM). Methods: From August 2011 to May 2021, a total of 1,049 patients with 681 unstable IAs and 556 stable IAs were retrospectively analyzed. IAs were randomly divided into training (64%), internal validation (16%), and test sets (20%). Convolutional neural network (CNN) analysis and conventional logistic regression (LR) were used to predict which IAs were unstable. The area under the curve (AUC), sensitivity, specificity and accuracy were calculated to evaluate the discriminating ability of the models. One hundred and ninety-seven patients with 229 IAs from Banan Hospital were used for external validation sets. Results: The conventional LRM showed 11 unstable risk factors, including clinical and IA characteristics. The LRM had an AUC of 0.963 [95% confidence interval (CI): 0.941-0.986], a sensitivity, specificity and accuracy on the external validation set of 0.922, 0.906, and 0.913, respectively, in predicting unstable IAs. In predicting unstable IAs, the DLM had an AUC of 0.771 (95% CI: 0.582-0.960), a sensitivity, specificity and accuracy on the external validation set of 0.694, 0.929, and 0.782, respectively. Conclusions: The CNN-based DLM applied to CTA images did not outperform the conventional LRM in predicting unstable IAs. The patient clinical and IA morphological parameters remain critical factors for ensuring IA stability. Further studies are needed to enhance the diagnostic accuracy.

Mathematical study of polycystic ovarian syndrome disease including medication treatment mechanism for infertility in women.

Among women of reproductive age, PCOS (polycystic ovarian syndrome) is one of the most prevalent endocrine illnesses. In addition to decreasing female fertility, this condition raises the risk of cardiovascular disease, diabetes, dyslipidemia, obesity, psychiatric disorders and other illnesses. In this paper, we constructed a fractional order model for polycystic ovarian syndrome by using a novel approach with the memory effect of a fractional operator. The study population was divided into four groups for this reason: Women who are at risk for infertility, PCOS sufferers, infertile women receiving therapy (gonadotropin and clomiphene citrate), and improved infertile women. We derived the basic reproductive number, and by utilizing the Jacobian matrix and the Routh-Hurwitz stability criterion, it can be shown that the free and endemic equilibrium points are both locally stable. Using a two-step Lagrange polynomial, solutions were generated in the generalized form of the power law kernel in order to explore the influence of the fractional operator with numerical simulations, which shows the impact of the sickness on women due to the effect of different parameters involved.

Temporal stability of tongue microbiota in older patients - A pilot study.

Background/purpose: Healthy states of human microbiota depend on a stable community of symbiotic microbes irrespective of external challenges from the environment. Thus, long-term stability of the oral microbiota is of importance, particularly for older patient populations. Materials and methods: We used next-generation sequencing (NGS) to examine the tongue microbiota of 18 individuals receiving long-term care over a 10-month period. Results: Beta diversity analysis demonstrated temporal stability of the tongue microbiota, as microbial compositions from all time points were indistinguishable from each other (P = 0.0887). However, significant individual variation in microbial composition (P = 0.0001) was observed, underscoring the presence of a unique microbial profile for each patient. Conclusion: The temporal dynamics of tongue microbiota exhibit long-term stability, providing diagnostic implications for oral diseases within older patient populations.

Evaluation of age-structured vaccination strategies for curbing the disease spread.

Age structure is one of the crucial factors in characterizing the heterogeneous epidemic transmission. Vaccination is regarded as an effective control measure for prevention and control epidemics. Due to the shortage of vaccine capacity during the outbreak of epidemics, how to design vaccination policy has become an urgent issue in suppressing the disease transmission. In this paper, we make an effort to propose an age-structured SVEIHR model with the disease-caused death to take account of dynamics of age-related vaccination policy for better understanding disease spread and control. We present an explicit expression of the basic reproduction number R 0 , which determines whether or not the disease persists, and then establish the existence and stability of endemic equilibria under certain conditions. Numerical simulations are illustrated to show that the age-related vaccination policy has a tremendous influence on curbing the disease transmission. Especially, vaccination of people over 65 is better than for people aged 21-65 in terms of rapid eradication of the disease in Italy.

Stability of radiomic features from positron emission tomography images: a phantom study comparing advanced reconstruction algorithms and ordered subset expectation maximization.

In this study, we compared the repeatability and reproducibility of radiomic features obtained from positron emission tomography (PET) images according to the reconstruction algorithm used-advanced reconstruction algorithms, such as HYPER iterative (IT), HYPER deep learning reconstruction (DLR), and HYPER deep progressive reconstruction (DPR), or traditional Ordered Subset Expectation Maximization (OSEM)-to understand the potential variations and implications of using advanced reconstruction techniques in PET-based radiomics. We used a heterogeneous phantom with acrylic spherical beads (4- or 8-mm diameter) filled with 18F. PET images were acquired and reconstructed using OSEM, IT, DLR, and DPR. Original and wavelet radiomic features were calculated using SlicerRadiomics. Radiomic feature repeatability was assessed using the Coefficient of Variance (COV) and intraclass correlation coefficient (ICC), and inter-acquisition time reproducibility was assessed using the concordance correlation coefficient (CCC). For the 4- and 8-mm diameter beads phantom, the proportion of radiomic features with a COV < 10% was equivocal or higher for the advanced reconstruction algorithm than for OSEM. ICC indicated that advanced methods generally outperformed OSEM in repeatability, except for the original features of the 8-mm beads phantom. In the inter-acquisition time reproducibility analysis, the combinations of 3 and 5 min exhibited the highest reproducibility in both phantoms, with IT and DPR showing the highest proportion of radiomic features with CCC > 0.8. Advanced reconstruction methods provided enhanced stability of radiomic features compared with OSEM, suggesting their potential for optimal image reconstruction in PET-based radiomics, offering potential benefits in clinical diagnostics and prognostics.

Research on the slip deformation characteristics and improvement measures of concrete-faced rockfill dams on dam foundations with large dip angles.

The pumped storage power station (PSPS) is an important measure to achieve the strategic goal of "dual carbon". As one of the preferred types for the upper reservoir dams of PSPSs, the concrete-faced rockfill dam (CFRD) often has a dam foundation on a steep transverse slop and is prone to produce slip deformation along the slope, resulting in poor anti-sliding stability of the dam slope. It is dangerous for the operation safety of PSPSs. Therefore, the slip deformation of CFRDs on dam foundations with large dip angles is investigated. The mechanism for the initiation of slip deformation is revealed. The design measures of physical mechanic and geometric structure are proposed to reduce slip deformation. The results show that the larger sliding forces and smaller anti-sliding forces are the fundamental reasons that CFRDs on dam foundations with large dip angles are prone to produce slip deformation. The larger the dip angle of the dam foundation, the larger the slip deformation of the dam body and face slab, and the smaller the safety factor of the dam slope. When the dip angle of the dam foundation is greater than 15°, the safety factor of the dam slope is less than the minimum value of 1.5 required by codes. The addition of pressure slopes can effectively reduce the slip deformation of the dam body or face slab and significantly improve the anti-sliding stability of the dam slope. When the height or width of the pressure slope platform is greater and the cohesion or internal friction angle of the pressure slope is larger, the slip deformations of the dam body and face slab are smaller, and the safety factor of the dam slope is greater. It is recommended that the height and width of the pressure slope platform be 1/2 times the maximum height of the main dam, and the density (cohesion and internal friction angle) of the pressure slope be equivalent to that of the main dam's rockfill material. The research results can provide theoretical and technical support for the design and construction of CFRDs for the upper reservoir of PSPSs.

Evaluation of the effect of chemical disinfection and ultraviolet disinfection on the dimensional stability of polyether impression material: an in-vitro study.

BACKGROUND: Various methods, chemical and physical, disinfect dental impressions. Common chemicals include 1% Sodium Hypochlorite and 2% glutaraldehyde, while UV radiation is a prevalent physical method. Few studies compare their effects on dimensional stability in polyether impressions. This study aims to assess such stability using different disinfection methods. Therefore, this study was planned to evaluate the dimensional stability of polyether impression material using different disinfection methods. METHODS: This in vitro study compared the effects of chemical disinfectants (1% Sodium Hypochlorite and 2% glutaraldehyde) and UV irradiation on the dimensional stability of polyether impression material. Groups A, B, C, and D, each with ten samples (N = 10), were studied. Group A was untreated (control). Group B was treated with 2% glutaraldehyde for 20 min, Group C with 1% Sodium Hypochlorite for 20 min, and Group D with UV rays for 20 min. A pilot milling machine drill was used to make four parallel holes labeled A, B, C, and D in the anterior and premolar regions from right to left. After sequential drilling, four implant analogs were positioned using a surveyor for accuracy. Ten open-tray polyether impressions were made and treated as described in the groups, followed by pouring the corresponding casts. Distortion values for each disinfection method were measured using a coordinate measuring machine capable of recording on the X- and Y-axes. RESULTS: A comprehensive analysis was conducted using the one-way ANOVA test for distinct groups labeled A, B, C, and D, revealing significant differences in the mean distances for X1, X2, X4, X5, and X6 among the groups, with p-values ranging from 0.001 to 0.000. However, no significant differences were observed in X3. Notably, mean distances for the Y variables exhibited substantial differences among the groups, emphasizing parameter variations, with p-values ranging from 0.000 to 0.033. The results compared the four groups using the one-way ANOVA test, revealing statistically significant distance differences for most X and Y variables, except for X3 and Y4. Similarly, post-hoc Tukey's tests provided specific pairwise comparisons, underlining the distinctions between group C and the others in the mean and deviation distances for various variables on both the X- and Y-axes. CONCLUSIONS: This study found that disinfection with 1% sodium hypochlorite or UV rays for 20 min maintained dimensional stability in polyether impressions.

Optimizing d-mannose and glyceraldehyde concentrations as glucose preservatives without clinically affecting biochemical test results.

Objectives: The objectives were to evaluate blood additives that combined lithium heparin (LH)-salt with glyceraldehyde (GLY) or d-mannose (MAN) for preserving glucose levels in plasma samples and to simultaneously determine the compatibility of these additives with 14 other biochemical tests. Methods: Blood samples from 40 subjects, equally divided into healthy and diabetic groups, were collected using five different additives. The three most effective additives, LH/GLY, LH/MAN, and LH/GLY/MAN, were selected for ensuring the best preservation of glucose levels and compatibility with 14 biochemical tests. One-way analysis of variance was used to analyze the mean paired differences of glucose level and biochemical tests. Simultaneously, the clinical criteria from Johns Hopkins Hospital were used to guide the interpretation and set acceptable thresholds for measurements that exceeded the standards. Results: The combination of 160 mmol/L GLY, 8.4 mmol/L MAN, and LH, maintained glucose levels at approximately 93.4-93.7 % for healthy subjects and 91.3-92.8% for subjects with diabetes mellitus over 8 h. The mean paired differences of glucose levels in preservation were statistically insignificant. The biases in 14 biochemical tests for LH/GLY/MAN and LH/MAN remained within the acceptable clinical criteria during the 8 h. Conclusions: Combining 160 mmol/L GLY, 8.4 mmol/L MAN, and LH, proved more effective in maintaining glucose levels than individual additives or the conventional sodium fluoride preservative. It did not yield clinical discrepancies in the 14 biochemical tests during 8 h at room temperature.

Evaluation of effect on stability of implants with and without platelet rich fibrin using a resonance frequency analyzer - An in-vivo study.

Background: Although the conventional replacement for lost teeth has been partial or full dentures, the need for a fixed, esthetic, and functional restoration makes dental implants a reliable alternative. Aim: To evaluate the initial and final stability of platelet rich fibrin coated implants using resonance frequency analyzer. Method: ology: Thirteen patients with two or more missing teeth were informed about the procedure, and a consent form was obtained after cone beam computer tomography evaluation. Blood was drawn from the anticubital area of the patient, which was centrifuged to obtain platelet-rich fibrin. In all, 26 implants were placed, among which 13 were platelet-rich fibrin-coated (test group) and 13 were without platelet-rich fibrin (control group), and implant stability quotient values were recorded. Results: The mean age of the patients was 34.4 (SD = 4.28). Majority of the patients were males (9; 69.2%) whereas there were only four (30.8%) female patients. When comparison between overall primary implant stability with and without PRF was done, the mean difference was 5.12 and this difference was not statistically significant (p = 0.221) whereas a statistically significant difference (p = 0.019) was found when comparison between overall secondary implant stability was done with and without PRF. The primary and secondary stability values for the control group were 69.18 ± 7.45 and 73.84 ± 8.21 respectively, and the primary and secondary stability values for the test group were 64.06 ± 12.66 and 81.49 ± 7.61 respectively, which showed statistically significant differences among the groups. The difference in these values signify that primary stability is more in control group whereas secondary stability is more in case group. This signifies that PRF enhances the stability of implant. Conclusion: Implants coated with platelet-rich fibrin exhibited better osseointegration than implants without platelet-rich fibrin.

Surface-displayed phenolic acid decarboxylase for increased vinylphenolic pyranoanthocyanins in blueberry wine.

During the fruit wine production, phenolic acid decarboxylase (PAD) converts free hydroxycinnamic acid into 4-vinyl derivatives that can then react spontaneously with anthocyanins, generating more stable pyranoanthocyanins that are responsible for the color stability of fruit wine. Nevertheless, the low PAD activity in yeast under the winemaking conditions has largely limited the generation of 4-vinyl derivatives. To bridge this gap, we expressed PAD from Bacillus amyloliquefaciens in Pichia pastoris and surface-displayed it on Saccharomyces cerevisiae. As a result, S. cerevisiae surface-displayed PAD (SDPAD) exhibited an enhanced thermal stability and tolerance to acidic conditions. Fermentation experiments showed that SDPAD can significantly increase the content of vinylphenolic pyranoanthocyanins and thus maintain the color stability of blueberry wine. Our study demonstrated the feasibility of surface display technology for color stability enhancement during the production of blueberry wine, providing a new and effective solution to increase the content of vinylphenolic pyranoanthocyanins in the fruit-based wines.

Does hunted wild boar meat meet modern consumer nutritional expectations?

The present study aimed to evaluate the nutritional characteristics of hunted wild boar (WB) meat and compare them with those of meat from analogous domestic animals (pigs) reared in two different rearing systems: indoor-intensive (PI) and outdoor-extensive (PO). WB meat showed a lower amount of lipid content compared to pork and a higher antioxidant activity compared to PI and PO. The comparison of the fatty acid composition of WB and domestic pig reveals significant differences in saturated fatty acids (SFA) and polyunsaturated fatty acids (PUFA), with WB having the highest PUFA level and the lowest SFA level. The omega 6/omega 3 (n-6/n-3) PUFA ratio, PUFA/SFA, atherogenic and thrombogenic indices (AI and TI), as well as the hypocholesterolemic/ hypercholesterolemic index (h/H), were calculated. The n-6/n-3 PUFA ratio was higher in pork independently of the rearing system. The PUFA/SFA ratio of WB meat was above the minimum ratio of 0.40 recommended to contribute to a reduction in the risk of coronary diseases in pork from both rearing systems. AI and TI were lower in WB meat compared to commercially reared pigs, while h/H was higher in WB in comparison with pork meat. WB meat shows good nutritional quality; therefore, the use of game meat as a food source could be appropriate and could benefit contemporary consumers looking for "green" and high-nutritional products.

Different doses and courses of omalizumab for patients with chronic spontaneous urticaria: A systematic review with meta-analysis and trial sequential analysis.

Background: The stability, efficacy, and safety of omalizumab at different doses and regimens for chronic spontaneous urticaria (CSU) are yet to be studied. Objective: A systematic review (SR) with meta-analysis (MA) and trial sequential analysis (TSA) was performed to assess the efficacy and safety of omalizumab in CSU. Methods: Randomised controlled trials (RCTs) of administering omalizumab versus placebo for CSU were searched. Random-effects MAs were performed using planned subgroup analyses. TSA was performed to control for the risk of random errors and assess the stability of our MA results. Publication bias was visually assessed using a contour-enhanced funnel plot and the trim-and-fill method. The quality of RCTs was assessed using the Cochrane Risk of Bias Tool 2. Results: Twelve studies met the inclusion criteria. Omalizumab had remarkable effects on the patient percentage of the weekly urticaria activity score is zero (UAS = 0) [RR 4.64, 95% CI (3.38, 6.37)], percentage of no angioedema-burdened days [MD 3.15, 95% CI (0.10, 6.19], patient percentage of UAS ≤6 [RR 3.05, 95% CI (2.46, 3.78)], and patient percentage of the weekly itch severity score minimally important difference (ISS7 MID) [RR 1.50, 95% CI (1.36, 1.66)]. Omalizumab was well tolerated across studies [RR 0.98, 95% CI (0.90, 1.08)]. TSA confirmed the above results, except for "the percentage of no angioedema-burdened day". Conclusion: Among the different doses and courses assessed, omalizumab (300 mg, 12 weeks) can be recommended as an effective treatment for patients with CSU. However, whether omalizumab improves angioedema requires further investigation. The clinical management of angioedema accompanying CSU requires further attention.

Dye stability of black cherry plum anthocyanins in the interaction with co-pigments and sucrose sweetener.

In this research, the co-pigmentation reactions between black cherry plum (Prunus cerasifera Ehrh. cv. Pissardii Nigra) anthocyanins and caffeic, gallic, 4-hydroxybenzoic, malic, and tannic acids with different concentrations (0, 120, 240, 480, and 960 mg L-1) at various temperatures (20, 40, 60, 80, and 100°C) were investigated at pH 3.5. The strongest immediate co-pigmentations resulted at 960 mg L-1, being significantly highest using tannic acid at all temperatures. In addition, the anthocyanin stability and the brown polymeric color formation were investigated in the presence of different concentrations of sucrose sweetener (0, 30, and 60%) and different pHs (2 and 3) in the range of 0-60 h. Also, the amount of furfural was measured in the presence of 0% and 30% sucrose concentrations at pH 2 after 20 h at 90°C by HPLC (high-performance liquid chromatography), and the most polymeric color formation was observed in the concentration of 60% sucrose at pH 2 after 60 h.

Breathing, postural stability, and psychological health: a study to explore triangular links.

Objective: This study aims to test the hypothesis that breathing can be directly linked to postural stability and psychological health. A protocol enabling the simultaneous analysis of breathing, posture, and emotional levels in university students is presented. This aims to verify the possibility of defining a triangular link and to test the adequacy of various measurement techniques. Participants and Procedure: Twenty-three subjects (9 females and 14 males), aged between 18 and 23 years, were recruited. The experiment consisted of four conditions, each lasting 3 minutes: Standard quiet standing with open eyes 1), with closed eyes 2), and relaxed quiet standing while attempting deep abdominal breathing with open eyes 3) and with closed eyes 4). These latter two acquisitions were performed after subjects were instructed to maintain a relaxed state. Main Outcome Measures: All subjects underwent postural and stability analysis in a motion capture laboratory. The presented protocol enabled the extraction of 4 sets of variables: Stabilometric data, based on the displacement of the center of pressure and acceleration, derived respectively from force plate and wearable sensors. Postural variables: angles of each joint of the body were measured using a stereophotogrammetric system, implementing the Helen Hayes protocol. Breathing compartment: optoelectronic plethysmography allowed the measurement of the percentage of use of each chest compartment. Emotional state was evaluated using both psychometric data and physiological signals. A multivariate analysis was proposed. Results: A holistic protocol was presented and tested. Emotional levels were found to be related to posture and the varied use of breathing compartments. Abdominal breathing proved to be a challenging task for most subjects, especially females, who were unable to control their breathing patterns. In males, the abdominal breathing pattern was associated with increased stability and reduced anxiety. Conclusion: In conclusion, difficulties in performing deep abdominal breathing were associated with elevated anxiety scores and decreased stability. This depicts a circular self-sustaining relationship that may reduce the quality of life, undermine learning, and contribute to muscular co-contraction and the development of musculoskeletal disorders. The presented protocol can be utilized to quantitatively and holistically assess the healthy and/or pathological condition of subjects.

The impact of overnight lairage on meat quality and storage stability of pork loin.

Lairage, a part of the animal welfare practices, has been known to mitigate pre-slaughter stress in animals. However, research investigating the relationship between lairage and pork meat quality remains scarce. In this study, we conducted a comparative analysis of the physicochemical quality and storage stability of pork from pigs subjected to immediate slaughter (CON) and those provided with a 24 h lairage before slaughter (LRG) over a 7-day storage period. The loins from 20 castrated pigs in each group, respectively, were collected at 1, 3, 5, and 7 days and used for analysis of meat quality and storage stability, including pH, meat color, moisture, water holding capacity, drip loss, cooking loss, shear force, fatty acid composition, lipid oxidation, antioxidant activity, and electrical resistance. Overall, there were no significant differences in physicochemical meat quality parameters between CON and LRG groups. Similarly, no differences were observed in the storage stability of pork including 2-thiobarbituric acid reactive substances, 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity and electrical resistance. However, the proportion of unsaturated fatty acids was significantly higher in LRG compared to CON. In conclusion, 24 h lairage for castrated pigs had limited impact on meat quality and storage stability but led to an increase in the unsaturated fatty acid proportion.

Comprehensive chromatographic assessment of forced degraded in vitro transcribed mRNA.

Heightened interest in messenger RNA (mRNA) therapeutics has accelerated the need for analytical methodologies that facilitate the production of supplies for clinical trials. Forced degradation studies are routinely conducted to provide an understanding of potential weak spots in the molecule that are exploited by stresses encountered during bulk purification, production, shipment, and storage. Consequently, temperature fluctuations and excursions are often experienced during these unit operations and may accelerate mRNA degradation. Here, we present a concise panel of chromatography-based stability-indicating assays for evaluating thermally stressed in vitro transcribed (IVT) mRNA as part of a forced degradation study. We found that addition of EDTA to the mRNAs prior to heat exposure reduced the extent of degradation, suggesting that transcripts may be fragmenting via a divalent metal-ion mediated pathway. Trace divalent metal contamination that can accelerate RNA instability is likely carried over from upstream steps. We demonstrate the application of these methods to evaluate the critical quality attributes (CQAs) of mRNAs as well as to detect intrinsic process- and product-related impurities.

Passivation of 2D Cs2PbI2Cl2 Nanosheets for Efficient and Stable CsPbI3 Quantum Dot Solar Cells.

Inorganic CsPbI3 perovskite quantum dots (PQDs) possess remarkable optical properties, making them highly promising for photovoltaic applications. However, the inadequate stability resulting from internal structural instability and the complex external surface chemical environment of CsPbI3 PQDs has hindered the development of CsPbI3 PQD solar cells (PQDSCs). In this work, the capping layer composed of inorganic two-dimensional (2D) Ruddlesden-Popper (RP) phase Cs2PbI2Cl2 nanosheets (NSs) is introduced, which may be effectively treated to improve the surface properties of the CsPbI3 PQD film. This modification serves to passivate defects by filling cesium and iodine vacancies while optimizing the energy band arrangement and preventing humidity intrusion, leading to the meliorative stability and photovoltaic performance. The optimized CsPbI3 PQDSCs achieve an enhanced power conversion efficiency (PCE) of 14.73%, with the superb stability of only a 16% efficiency loss after being exposed to ambient conditions (30 ± 5% RH) for 432 h.